Arsenic-free Zinc-manufacture,factory,supplier from China

(Total 24 Products for Arsenic-free Zinc)
Appearance and traits: white crystals, extremely salty, non -toxic. It is easy to solverate in water, ether, glycerin and alkali, slightly soluble in ethanol, but insoluble in water -free ethanol, which is hygroscopic and easy to lump; New potassium salt is generated by reciprocating and disintegrating.
  Contact Now
Zinc Borate is an environmentally friendly non -halogen flame retardant. It has the characteristics of non -toxic, low -water solubility, high heat stability, small particle size, small gravity, and good decentralization. As a high -efficiency flame retardant Rubber, coatings and other fields.
  Contact Now
Molecular weight: 65.39 Grade: 5N MDL number: MFCD00011291 EC number: 231-175-3
  Contact Now
Lactic acid is a carboxylic acid, the molecular formula is C3H6O3, containing a hydroxyl group, belonging to α-hydroxyory (AHA). In an aqueous solution, the carboxyl group releases a proton to generate lactate ion CH3CH (OH) COO-.
  Contact Now
citric acid is without problems soluble in water and ethanol, its solubility is 59% at 20℃, and the ph of its 2% aqueous solution is 2.1.
  Contact Now
Generally speaking, when the energy of the arrangement cannot be satisfied with oxygen breathing, it is arranged that the oxygen that cannot be obtained may not satisfy the quick treatment of oxygen, the concentration of lactic acid will rise. In this case, the acetone dehydrogenase cannot be converted to acetyl coenzyme a, pyruvate start-up. In this case, if the lactate dehydrogenase does not reduce the reduction of pyruvic acid as lactic acid, the composition of triphosphate is inhibited.
  Contact Now
The lactic acid transport speed is affected by a series of factors, and includes a monocarboxy-dient, lactate dehydrogenase concentration and isomer form, and the oxidative capacity arranged. Generally, the concentration of lactic acid in the blood is from 1-2 mmol / L during non-exercise, and can rise to 20 mmol / L during intense exercise.
  Contact Now
Ricia oil contains a lot of ricic acid (more than 80%), so many unique properties: 1. It is easy to dissolve in ethanol, which is difficult to dissolve in petroleum ether. This feature is more likely to distinguish between castor oil from other grease. 2. The viscosity is much higher than that of the general oil, and 25 is 680 cps, the viscosity index 84, the friction coefficient is very low (0.1). The fluidity of castor oil is good, and the refined castor oil can still flow in -22. 3.
  Contact Now
Chemical nature: Forbidden qualitative: strong oxidizing agent, strong reducing agent, strong acid, strong base. Ecological nature: Ecotoxicity EC50: 1.2 ~ 1.51mg / L (luminous bacteria, microtox toxicity test) Biodegradability Miti-I test, initial concentration of 100 mg / L, sludge concentration 30 mg / L, 2 weeks later degraded 77%. Non-biodegradability In the air, when the hydroxyl radical concentration is 5.00 × 105 / cm3, the degradation of the half-life is 7.8d (theory). Other harmful effects The material is damaged by the environment and should pay spe
  Contact Now
HCFC-141b (monofluorodichloroethane) is a high-purity liquid widely used in cleaning and solvent fields. Because its damage to the ozone layer is 1/10 of CFC-113, it is designated as an ideal substitute for fully halogenated chlorofluorocarbons. HCFC-141b is a widely used non-perhalogenated chlorofluorocarbon. Although its destructive effect on the ozone layer has been greatly reduced compared to fully halogenated chlorofluorocarbons, it can still cause damage to the ozone layer that is difficult to recover. As a result, its use is gradually being reduced around the world.
  Contact Now
When the temperature drops to 2.18K, the properties of liquid helium will change suddenly, the viscosity is very small, and it becomes a super fluid that can flow upwards along the wall of the container. The thermal conductivity is 800 times that of copper. It becomes a thermal conductor with excellent thermal conductivity. Its specific heat capacity, surface tension, and compressibility are all abnormal. This abnormal liquid is called liquid helium II, and the normal liquid helium is called liquid helium I.
  Contact Now
Biphenyl is found in coal tar, crude oil and natural gas. The preparation methods of biphenyl include the chemical composition method of making biphenyl through benzene pyrolysis and the separate extraction method of making biphenyl through various coal tar fractions. The mass fraction of biphenyl in coal tar is 0.20%-0.40%, and coal tar extraction method and chemical composition method coexist.
  Contact Now
Potassium hydroxide is a common inorganic base with a chemical formula of KOH and a molecular weight of 56.1. It is a white powder or flake solid at room temperature.
  Contact Now
White oblique crystals, industrial products are white or light gray lumps or rods. Easily soluble in water, emits a lot of heat of dissolution when dissolved, soluble in ethanol, slightly soluble in ether. It is deliquescent and has strong water absorption. Potassium hydroxide is strongly alkaline and corrosive, and its properties are similar to sodium hydroxide, which can cause burns. It can absorb water and dissolve in the air, and absorb carbon dioxide to gradually become potassium carbonate. The pH of the 0.1 mol/L solution is 13.5.
  Contact Now
Methyl 2-chloropropionate is an organic compound with the chemical formula C4H7ClO2, mainly used as an intermediate in pesticides, pharmaceuticals, and spices.
  Contact Now
Dissolving function: soluble in water and some solvents, such as ethanol/water, propanol/water in appropriate proportions. The aqueous solution has surface activity. High transparency and stable function. Different standard products have different gel temperatures and solubility changes with viscosity. The lower the viscosity, the greater the solubility. Different standards of HPMC have different functions. The dissolution of HPMC in water is not affected by pH.
  Contact Now
Appearance: watery bright liquid with pleasant ketone-like fragrance. Main uses: Used as a solvent for spray paint, nitrocellulose, some fiber ethers, camphor, grease, natural and synthetic rubber. Precautions for storage and transportation: Store in a cool and ventilated warehouse. Keep away from kindling and heat sources. The warehouse temperature should not exceed 30℃. Avoid direct sunlight. Keep the container sealed. It should be stored separately from oxidant. Lighting, ventilation and other equipment in the storage room should be explosion-proof.
  Contact Now
Ethylene glycol ether (2-ethoxyethanol) is an organic compound with a molecular formula of C4H10O2 and a molecular weight of 90.12. It is a colorless and transparent liquid.
  Contact Now

Relate News

Antioxidants are substances that block the adverse effects of oxygen. It is a class of substances that can help capture and neutralize free radicals, thereby eliminating the damage caused by free radicals to the human body. Antioxidants refer to food additives that can prevent or delay the oxidation of food, improve the stability of food and prolong the storage period. The correct use of antioxidants can not only prolong the storage period and shelf life of food, bring good economic benefits to producers and consumers, but also bring better food safety to consumers.
Antioxidants can be used as hydrogen donors to scavenge free radicals generated during the chain initiation stage, thereby inhibiting or reducing the oxidation of oils. Therefore, in order to delay the oxidation of fats and extend their shelf life, the most common and effective way is to add antioxidants to the fats.
Acetic acid, commonly known as acetic acid (AcOH) because it is the main component of vinegar, is one of the most important fatty acids. In nature, it occurs in many plants as free or esters. Molecular formula CH3COOH.
The organic improvement of the titanium dioxide surface is to carry out organic coating on the surface of the particles through the chemical reaction or physical absorption of organic molecules on the surface of the particles, transform the surface state of the particles, so that it can be effectively dispersed in the organic solvent, and improve the powder in the organic matter. Compatibility in the interface. Generally can be divided into esterification method, surfactant method, coupling agent method and polymer coating method.
The solid defoamer is generally added in the form of spraying, and the viscosity of the coating is relatively large. In this case, if the solid defoamer particles are relatively fine, it is very likely that the particles cannot be effectively dissolved, which will eventually cause a large amount of The precipitation material.
In 2011, global methanol demand reached 54 million tons. In the next few years, driven by the rapid development of emerging applications, global methanol demand will soar to 85 million tons in 2015.
Castor oil is a kind of fatty acid triglyceride, which exists in castor bean seeds, and the content is between 35% and 57.%.
According to the data, the domestic xylene market price trend has fallen sharply.The Pengzhou Petrochemical Plant, Urumqi Petrochemical Plant, and Fuhai Chuang Aromatics Plant each run one line. Hengli Petrochemical’s PX plant is overhauled, and other plants are temporarily The operation is stable.
Ammonia water is an aqueous solution of ammonia dissolved in water. Due to the complexity of its components, ammonia water shows diversity in its properties.