TDI-manufacture,factory,supplier from China
(Total 24 Products for TDI)
The toluene diisocyanate has 2,4-toluene diisocyanates and 2,6-toluene diisocyanate (TDI).
Contact Now
There are two isomers of 2,4-toluene diisocyanate and 2,6-toluene diisocyanate (TDI). According to the content of the two isomers, there are three standard products in the industry: (1) TDI-65 contains 2,4-TDI65%, 2,6-TDI35%; (2) TDI-80 contains 2,4- TDI80%, 2,6-TDI20%, more common; (3) TDI-100 contains 2,4-TDI100%. Carbon dioxide occurs with water effect. Easy to work with compounds containing active hydrogen atoms. Linear polyurethane or polyurethane resin with diol effect.
Contact Now
Car urea is an essential product for heavy-duty diesel vehicles to meet the National IV emission standards. Vehicle urea refers to an aqueous urea solution with a urea concentration of 32.5% and ultrapure water as the solvent. The raw materials are urea crystals and ultrapure water. For diesel vehicles such as heavy trucks and passenger cars to meet the National IV emission standards, a suitable SCR system must be selected for exhaust gas treatment, and this system must use urea solution to treat nitrogen oxides in the exhaust gas.
Contact Now
Chemical reagents are relatively standard substances for chemical research, ingredient analysis, is an important condition for scientific and technological progress, which is widely used in the composition of material, other, qualitative and quantitative analysis.
Contact Now
it can also be used as high octane gasoline components, is an important raw material for organic chemicals. It can also be used to remove the bitumen of the body. The hospital pathology is primarily used for tissue, slice of pilot and dewaxing.
Contact Now
mercaptan wrapped in fuel is malodorous and corrosive, which reduces the lead content of gas. except, mercaptan is also an oxidation initiator, which can promote the oxidation and condensation of risky components in fuel to gel, resulting in terrible garage balance of gasoline. cobalt phthalocyanine sulfonate is an powerful catalyst for disposing of mercaptan sulfur from heavy oil, and it has the identical effect. whilst in use, dissolve the catalyst in 10% alkali solution, heat it slightly for a time frame, and stir to dissolve it before use.
Contact Now
This product is the standard configuration of SCR technology, the solution concentration is 32.5% 0.7%, which can effectively reduce exhaust pollution and ensure engine efficiency
;8-stage pretreatment + RO reverse osmosis technology + EDI electrodeionization water purification technology + high-precision filtration and purification to ensure the purity of the solution from the source,
Delay SCR scaling, protect the urea pump and pipeline; select ultra-high-purity urea particles, made through multiple purification processes, long-term maintenance of the system and catalyst activity, and prol
Contact Now
In the textile industry, it is used as a dispersant for fiber lubricants and chemical fiber oils, as well as automotive brake fluids, pesticide dispersants, dry cleaning agents, cutting oil solvents, organic synthesis intermediates, auxiliary solvents for mineral oil emulsions, and analytical reagents.
Contact Now
Carbonide is a kind of inorganic compound with CS2 chemical formula. It is a colorless liquid and is a common solvent.
Contact Now
Methyl 2-chloropropionate is an organic compound with the chemical formula C4H7ClO2, mainly used as an intermediate in pesticides, pharmaceuticals, and spices.
Contact Now
The lactic acid transport speed is affected by a series of factors, and includes a monocarboxy-dient, lactate dehydrogenase concentration and isomer form, and the oxidative capacity arranged. Generally, the concentration of lactic acid in the blood is from 1-2 mmol / L during non-exercise, and can rise to 20 mmol / L during intense exercise.
Contact Now
The industrial neighborl xylene is a raw material, first washes the acid layer to the acid layer colorless, then use 10% sodium hydroxide solution, water is washed to pass, and the aqueous layer is separated, and the calcium chloride is borned with anhydrous carbon. After the distinction is low, the intermediate fraction is collected, that is, a pure product.
Contact Now
Solubility: insoluble in water, soluble in most organic solvents such as alcohol, ether.
Contact Now
Solubility: Insoluble in water, acid and alkali, but soluble in organic solvents such as alcohol, ether and benzene.The preparation methods of biphenyl include the chemical composition method of making biphenyl through benzene pyrolysis and the separate extraction method of making biphenyl through various coal tar fractions. The mass fraction of biphenyl in coal tar is 0.20%-0.40%, and coal tar extraction method and chemical composition method coexist.
Contact Now
When the temperature drops to 2.18K, the properties of liquid helium will change suddenly, the viscosity is very small, and it becomes a super fluid that can flow upwards along the wall of the container. The thermal conductivity is 800 times that of copper. It becomes a thermal conductor with excellent thermal conductivity. Its specific heat capacity, surface tension, and compressibility are all abnormal. This abnormal liquid is called liquid helium II, and the normal liquid helium is called liquid helium I.
Contact Now
Oxygen is a colorless and odorless gas, and the most common elementary form of oxygen. Melting point is -218.4°C, boiling point is -183°C. It is not easily soluble in water, and about 30mL of oxygen can be dissolved in 1L of water. Oxygen in the air accounts for about 21%. Liquid oxygen is sky blue. Solid oxygen is blue crystals.
Contact Now
Amino -alumanate pesticide is a synthetic pesticide developed after organic phosphate. Its general formula is RO (C) NRR. Amino -aminate pesticides generally have no special odor, stable in acidic environments, alkali decomposition, and most varieties are lower toxicate than organic phosphate
Contact Now
Can gradually decompose, moist and high temperatures can accelerate decomposition. Can be decomposed by ethanol and silver ion.White crystalline powder.
Contact Now
Biphenyl, whose molecular formula is C12H10, is an important organic raw material and is widely used in the fields of medicine, pesticides, dyes, and liquid crystal materials.
Contact Now
Sodium peroxide is an inorganic substance with a chemical formula of Na2O2 and a molecular weight of 77.98. Beige powder or granules. The relative density is 2.8.
Contact Now
Helium is a rare gas. Its English name is Helium, and its element symbol is He. It is a colorless and odorless inert gas. Its chemical properties are not vivid. Under normal conditions, it is difficult to react with other substances.
Contact Now
Relate News
TDI is the abbreviation of toluene diisocyanate. TDI is a polycyanate widely used in industrial production. It is a polyurethane material and an important basic material. Mainly used to make flexible polyurethane foam, polyurethane elastomer, coatings, adhesives, etc.
TDI (toluene diisocyanate) is one of the commonly used polyisocyanate, and polyisocyanate is an important base material of polyurethane (PU). The TDI commonly used in the polyurethane industry is a mixture of 2,4-TDI and 2,6-TDI isomers, including three commonly used grades.
Hydrogen peroxide is used for oxygen bleaching or one-bath production and processing of annealing, boiling and bleaching. Hydrogen peroxide is often added to the water. Hydrogen peroxide is relatively stable in weakly alkaline or neutral conditions, and in weakly alkaline conditions. The addition of hydrogen peroxide has strong oxidizing properties, and the presence of heavy metal ions leads to early catalytic decomposition of hydrogen peroxide, which not only causes damage to hydrogen peroxide, but also damages fibers.
Castor oil is a kind of fatty acid triglyceride, which exists in castor bean seeds, and the content is between 35% and 57.%.
The principle of potassium hydroxide removal of oil stains is actually a simple chemical principle. Since oil stains are a lipid chemical substance, from the analysis of its chemical composition, they are higher fatty acids and glycerides.
The company's latest product
Russia -produced potassium chloride large amount of spot
Welcome to inquire inquiry or send mailbox
Sanen provides a year-round supply of 90/95 potassium hydroxide with favorable price and quality assurance. Welcome to inquire!
The appearance of potassium hydroxide is white lumps or powder, with strong corrosiveness and strong alkalinity. When potassium hydroxide is exposed to gas, it is easily wetted by moisture in the air, digesting and absorbing carbon dioxide to become potassium carbonate.
Alumina is aluminum hydroxide. The development speed in the domestic chemical professional market is very fast, and common aluminum hydroxide mainly has industrial grade and pharmaceutical level.
This product is a white powder with strong hygroscopicity. It is prone to deliquesce when exposed to the air and absorbs carbon dioxide to generate potassium carbonate.